Plastic Injection Molding

Archive for the ‘Plastic Blow Molding’ Category

Blow-Molded Bath Seat with backrest
for safety and comfort. Heavy-duty anodized aluminum frame with non-marring, slip-resistant rubber tips offer added safety and support.

* Seat constructed of high-density plastic with drainage holes.
* Handholds molded into seat for additional stability.
* High-density plastic seat and backrest
* Seat height adjusts from 14 to 19 in 1 increments
* Seat width: 20
* Seat depth: 12
* Width between legs: 13
* Tool-free assembly
* Weight: 5 lbs.
* Weight capacity: 250 lbs.

Read the rest of this entry »

Made of durable blow-molded plastic and can be stacked Built-in handle in back of chair 32-1/4\’H x 18-1/4\’W x 17\’D Fully assembled 1-year mfr. limited warranty Heavy-duty chairs are lightweight and durable.

Read the rest of this entry »

DescriptionStrong stand-up case contains 7-oz. claw hammer with hardwood handle, 5/8\” x 12-ft. tape measure, 6\” long nose and 6\” slip joint pliers, 6\” adjustable wrench, screwdriver with magnetic tip, 3-piece precision screwdriver, folding lock-back utility knife, ten replacement blades with plastic box, 4-piece hex key set, 9\” torpedo level with three vials and 20, 1\” bits with two-piece holder.Great Neck GN48.GNS GN48.FeaturesStrong stand-up case contains 7-oz.claw hammer with hardwood handle, 5/8\” x 12-ft.tape measure, 6\” long nose and 6\” slip joint pliers, 6\” adjustable wrench, screwdriver with magnetic tip, 3-piece precision screwdriver, folding lock-back utility knife, ten replacement blades with plastic box, 4-piece hex key set, 9\” torpedo level with tProduct DetailsNumber of Pieces48Pre-Consumer Recycled Content Percent0 %Post-Consumer Recycled Content Percent0 %Total Recycled Content Percent0 %

Read the rest of this entry »

- 56 1/2H x 30 1/2W x 22 3/4D – 36 lbs. weight Light weight, easy to maneuver in tight spaces, and built to last a life time…introducing the Blow Mold Easel. Our Blow Mold Easel is constructed from durable light-weight blow mold plastic resin, on a super strong 1\” square box rail extruded steel frame that has been powder coated to resist scratches. Our Magne-Rite board is molded into the blow molded frame. The Magne-Rite board accepts magents and has a 40 1/2\”H x 28\”W writing surface. The built in matching blow molded tray has spaces for marker pens, paint cups and miscellaneous storage. Also included are 2 totes (6 1/2\”H x 12 1/2\”W x 15 1/2\”D ea.) for additional storage. The four 4\” swivel casters (2 locking) allow you to wheel this easel anywhere.

Read the rest of this entry »

Blow-Molded Folding Tables Folding Table, 60\” Round Blow-Molded Commercial Plastic Top Folding Table Is Stain and Impact Resistant Table features a strong steel frame with five top support tubes on back. Lightweight tables are easy to handle. Waterproof plastic top resists damage. State finish when ordering: Gray or Mocha. *Please note that the stock photo may differ from the actual product model listed above. zoom Specifications for: Blow-Molded Folding Tables, Folding Table, 60\” Round MDR90R60P Product Name: Blow-Molded Folding Tables – Standard 29\” Fixed Height – Folding Table, 60\” Round Manufacturer: Medline Industries Manufacturer #: MDR90R60P SKU: MD309991 Packaging: 1 Each / Each Description: Folding Table, 60\” Round Latex-Free: No Top Seller: No Product Notes: TABLE,FOLDING,BLOW-MOLDED PLASTIC,60\”RD Keywords: Furnishings, Facility Furniture, Folding Furniture, Tables, Blow-Molded Folding Tables Related Items SKU # PRODUCT # DESCRIPTION MD310013 MDR901872P Blow-Molded Folding Tables – Standard 29\” Fixed Height – Folding Table, 18\” x 72\”; Folding Table, 18\” x 72\”; 1 Each / Each MD310014 MDR902448P Blow-Molded Folding Tables – Standard 29\” Fixed Height – Folding Table, 24\” x 48\”; Folding Table, 24\” x 48\”; 1 Each / Each MD309993 MDR903072P Blow-Molded Folding Tables – Standard 29\” Fixed Height – Folding Table, 30\” x 72\”; Folding Table, 30\” x 72\”; 1 Each / Each MD309992 MDR903096P Blow-Molded Folding Tables – Standard 29\” Fixed Height – Folding Table, 30\” x 96\”; Folding Table, 30\” x 96\”; 1 Each / Each MD309990 MDR90A2449P Blow-Molded Folding Tables – Adjustable Height – Folding Table, 24\” x 48\”; Folding Table, 24\” x 48\”; 1 Each / Each MD309989 MDR90A3072P Blow-Molded Folding Tables – Adjustable Height – Folding Table, 30\” x 72\”; Folding Table, 30\” x 72\”; 1 Each / Each MD309988 MDR90A3096P Blow-Molded Folding Tables – Adjustable Height – Folding Table, 30\” x 96\”; Folding Table, 30\” x 96\”; 1 Each / Each MD309991 MDR90R60P Blow-Molded Folding Tables – Standard 29\”

Read the rest of this entry »

Correll Adjustable Height 48\” Rectangular Blow-Molded Folding Table.Rest easy with this low maintenance, heavy duty blow-molded folding table. It\’s the best on the market for heavy commercial use where the top will be exposed to foods, crayons, markers, paints, chemicals, and other potential stains. The light-weight, waterproof, and virtually indestructible one-piece blow-molded plastic top resists damage even from solvents and chemicals like gasoline, paint remover, battery acid, and drain cleaner. The leg height is adjustable from 22\” to 32\” in 1\” increments. Product Features: Paint and permanent marker can be removed without damage Colors go all the way through, will not wear or scratch off Strong steel ladder frame 18ga. steel pedestal legs Mar-proof plastic foot caps Automatic lock-open mechanism Available in gray, mocha, red, yellow, blue or green Height adjustable from 22\” to 32\” 48\” W x 24\” D..

Read the rest of this entry »

Blow-Molded Banquet Plastic Resin Folding Tables by Correll can be handled with ease due to its feather-like weight. Blow molding on top ensures protection to surface from all kinds of stains like food, chemical, acid or paints. They are versatile enough to be used in schools, churches and even cafeterias. These tables are known to offer a durable, undamaged performance and are virtually indestructible. Surface color runs ageless without wear or chip off. Prices have been reduced $10 cheaper!

Read the rest of this entry »

Blow Mold Grey Resin light way tables features 1\”\” thick with reinforced corners, large folding tubular steel legs with reinforcing cross bars for stability, and rubber glides for scratch resistance. Features: -Perfect for classrooms and lunchrooms. -Constructed from blow mold plastic and tubular metal legs with cross bar supports. -Blow mold plastic tables. -Stain resistant. -Sturdy steel frame. -Ideal for indoor or outdoor use. -Easy to handle. -Grey speckled smooth surface finish. -Overall Dimensions: 29\”\” H x 72\”\” W x 30\”\” D.

Read the rest of this entry »

Blow Mold Grey Resin light way tables features 1\”\” thick with reinforced corners, large folding tubular steel legs with reinforcing cross bars for stability, and rubber glides for scratch resistance. Features: -Perfect for classrooms and lunchrooms. -Constructed from blow mold plastic and tubular metal legs with cross bar supports. -Blow mold plastic tables. -Stain resistant. -Sturdy steel frame. -Ideal for indoor or outdoor use. -Easy to handle. -Grey speckled smooth surface finish. -Overall Dimensions: 29\”\” H x 72\”\” W x 30\”\” D.

Read the rest of this entry »

G7046 20\” Plastic Tread – SWAN A42077-0A=20\” B=18\” Parts List for Swimming Pool Ladders and handrails,Ladder Bumpers,ladder treads,pool ladder bolts nuts, ladder steps for Swan pool ladders, paragon pool ladders,swimquip pool ladder parts, ladder wedge,escutchteons ladder flanges,pool latter parts, pool ladder parts inground pool ladder parts, parts for pool steps, in wall recessed pool steps,ladder anchors, pool ladder guard,ladder rung,sr smith ladder parts. Always low prices and fast shipping. Discount swimming pool Ladder and Handrail parts and other swimming pool Deck Equipment parts are always in stock and available.Back To Ladder & Handrail Parts

Read the rest of this entry »