Plastic Injection Molding

Posts Tagged ‘Plastics’

This excerpt discusses the Modes of Operation of the injection molding machine: manual mode (including set-up or mold set option), semi-automatic mode and automatic mode.

Our Injection Molding Basics series provides participants with a general understanding of the three major aspects of injection molding; the injection molding machine, the molding process, and the injection mold. These programs use 3D animation to demonstrate the inner workings of the machine and mold and to easily convey otherwise complex concepts. Important safety precautions are stressed throughout these training programs.

A. Routsis ociates – Complete Training Solutions for the Plastics Industry. Visit http://www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.

Duration : 0:1:58

Read the rest of this entry »

Tags: 3D, animation, automatic, basic, ejection, industry, Injection Molding, Injection Moulding, manual, mode, modes, modes of operation, Mold, mold set, Molding Machine, molding process, Mould, moulding, Moulding Machine, operation, option, part, plastic, Plastics, plastics industry, plastics training, polymer, screw, semi, semi-automatic, set-up, setup, training

Designed to introduce the many maintenance considerations for an injection molding machine. Participants are also shown newer technologies; such as laser leveling, ultrasonic tie bar stretch measuring, and portable machine process monitors.

- Basic machine maintenance & safety concerns
- Fluid and platen maintenance
- Screw and barrel maintenance
- Preventative maintenance & logging

A. Routsis ociates – Complete Training Solutions for the Plastics Industry. Visit http://www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.

Duration : 0:1:44

Read the rest of this entry »

Tags: 3D, animation, care, concave, concavity, industry, Injection Molding, Injection Moulding, locating, machine, maintenance, Mold, Molding Machine, molding process, Mould, moulding, Moulding Machine, plastic, Plastics, plastics industry, plastics training, plate, platen, polymer, ring, Routsis, screw, shim, training, wear

This excerpt shows the basic components of an injection molding machine – base, hopper, barrel, screw, heaters, clamping unit, platens, ejection system, and control panel – using 3D animation.

This course provides participants with a general introduction to the plastics industry. The primary focus of this training program is the day-to-day operations of a typical injection molding facility. An Introduction to Injection Molding was created for newcomers to the injection molding industry or anyone that would like to learn more about plastics.

A. Routsis ociates – Complete Training Solutions for the Plastics Industry. Visit http://www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.

Duration : 0:1:19

Read the rest of this entry »

Tags: 3D, animation, barrel, basic, clamp, components, control panel, controls, ejection, ejection system, ejector, heater, hopper, industry, Injection Molding, Injection Moulding, Mold, Molding Machine, molding process, Mould, moulding, Moulding Machine, part, plastic, Plastics, plastics industry, plastics training, platen, platens, polymer, screw, training

Demonstration of the Stork S 1500-850 injection molding machine at the K2007 in Dusseldorf. The machine is producing a thin wall container in 2 cavities and side entry takeout. the cycle time is 1.8 seconds.

Duration : 0:4:15

Read the rest of this entry »

Tags: automation, Injection, machine, Molding, Plastics, thin, wall

Jinming Plastics Equipment Co., Ltd, established in 1987, is one of the leading providers of blow film lines, blow molding machines and cast film lines in China. In recent years, JinMing is also getting known around the world as our products exported to North America, South America, Australia, Eastern Europe and Asia.

Duration : 0:0:35

Read the rest of this entry »

Tags: BLOW, blownfilm, blownfilm.net, cast, extrusion, film, jinming, Molding, Plastics

IMG Plastec Blow Molding Equipment, Represented in the USA by Apex Industrial Systems, Spring, TX see us at NPE 2009 (S44073) www.imgplastec.com

Kevin Overton (832) 264-7200
apexsales@sbcglobal.net

Contact for more information and a price Quote.

Duration : 0:5:57

Read the rest of this entry »

Tags: Accumulator, BLOW, Machinery, Molding, plastic, Plastics

Join Andy Routsis, founder and president of A. Routsis ociates, as he presents many aspects the typical injection molder overlooks.

When optimizing the injection molding process, many injection molders stop their efforts after adjusting a few parameters such as cooling time. Andy will focus on often overlooked concepts such as the proper use of injection profiling, appropriate cushion sizing, and material preparation.

This seminar can benefit any engineer, processor, supervisor, technician, or die setter as well as anyone involved in managing a molding operation.

Duration : 0:9:46

Read the rest of this entry »

Tags: barrel, defect, defects, document, documentation, engineer, hold, ides, Injection, manufacturing, Mold, Molding, pack, packing, paulson, plastic, Plastics, presentation, pyrometer, rjg, Routsis, science, spe, spi, tacking, temperature, tooling, train, traning, troubleshoot, troubleshooting, webinar

This excerpt discusses Material Preparation and handling of plastics, including mixing of plastic material and additives (such as impact modifiers, fillers, flame retardants, mold release agents, plasticizers, reinforcements, heat stabilizers, lubricants and colorants), using dessicant dryers for material drying and dew meters for evaluating the moisture content of a plastic material.

Our Injection Molding Basics series provides participants with a general understanding of the three major aspects of injection molding; the injection molding machine, the molding process, and the injection mold. These programs use 3D animation to demonstrate the inner workings of the machine and mold and to easily convey otherwise complex concepts. Important safety precautions are stressed throughout these training programs.

A. Routsis ociates – Complete Training Solutions for the Plastics Industry. Visit http://www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.

Duration : 0:1:59

Read the rest of this entry »

Tags: 3D, additives, animation, basic, colorants, dessicant, dew meter, dryer, drying, ejection, industry, Injection Molding, Injection Moulding, lubricants, material, Material Preparation, materials, mixing, moisture, Mold, Molding Machine, molding process, Mould, moulding, Moulding Machine, part, plastic, Plastics, plastics industry, plastics training, polymer, reinforcements, Routsis, screw, training

This excerpt illustrates the injection molding process with 3D animation showing how the reciprocating screw injection molding machine melts, injects, fills the closed injection mold, cools the plastic and ejects the plastic parts from the mold.

This course provides participants with a general introduction to the plastics industry. The primary focus of this training program is the day-to-day operations of a typical injection molding facility. An Introduction to Injection Molding was created for newcomers to the injection molding industry or anyone that would like to learn more about plastics.

A. Routsis ociates – Complete Training Solutions for the Plastics Industry. Visit http://www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.

Duration : 0:0:50

Read the rest of this entry »

Tags: 3D, animation, basic, ejection, industry, Injection Molding, Injection Moulding, Mold, Molding Machine, molding process, Mould, moulding, Moulding Machine, part, plastic, Plastics, plastics industry, plastics training, polymer, screw, training